If that is ok you can move on to the next step. After Installing the BMW Standard Tools, make sure you have a connection in INPA and both dots are black.You have created you own coding profile! Now let`s go ahead and learn how to use NCS EXPERT to code features on a car. Safe NCS EXPERT can be got with packages of K+DCAN cable or ICOM A2 emulator.Īfter making these modifications go ahead and click File->Save profile as and save it as “CODING.pfl”, then go to File->Edit Profile>Profile Info and change the name to whatever you want, then exit and click again on File->Save Profile.
NOTE: This works only for Ex series vehicles, for newer F series coding check out the other guides on using Esys. NCS EXPERT is a tool used for BMW E series coding that will enable you to modify many values inside the modules installed on your car. In our future tutorials we will show you how to change the VO (Vehicle Order) for retrofits, how to change the manufacturing year and what`s the point of doing that, how to recode or reset a module with standard factory settings and even how to change the VIN number on a used module by using another very handy piece of software called Tool32. These “expert” profiles should not have the “FSW-/PSW-Manipulate with FSW_PSW.MAN” option enabled if necessary, edit the profile to disable this option to prevent errors from occurring during the reset procedures (save the profile under a unique name).Ģ.Click on the FG/ZCS/FA button (or press )… (depending on what “expert” profiles you have available or installed), then click on OK.NCS EXPERT can be used in a variety of ways, this being the easiest. …select “CAS”, “FRM”, or “NFRM” ECU (it doesn’t matter which), then OK. This preloads the VIN into NCS Expert Tool so it won’t need to be manually entered for follow-on operations.
NCS Expert is now ready to process ECUs.ĥ.Select the Stepper Motor Control module that needs to be reset (either “LSMC” or “RSMC”) from the ECU list, then OK. The module is now reset to factory settings.ħ.If the other module needs to be reset, click on Change SG/SGET…Ĭorrecting Directional Aiming of SMC Modulesġ.From the menu bar choose File -> Load Profile menu… The name of the ECU and its firmware version is read from the vehicle and displayedĦ.Verify the ‘”JOBNAME” is “SG_CODIEREN” (“Write Coding”)…Īnd wait for the status to go from “Coding active” to “Coding ended”. Select the “Expertmode” profile or “NCS Dummy profile” (depending on what “expert” profiles you have available or installed), then click on OK.ģ.Select the Stepper Motor Control ECU that needs to be corrected (“LSMC” or “RSMC”), then OK.Ĥ.Verify that the “JOBNAME” is “CODIERDATEN_LESEN” (“Read Coding”).
0 kommentar(er)
